Spray Max 2K Epoxy Rust-Cure Primer, Gray, Aerosol (2)

The SprayMax 3680033 2K Epoxy Rust-Cure Primer is a 2K epoxy aerosol spraycan that boasts excellent corrosion resistance and maximum adhesion to bare metals. Featuring innovative packaging, SprayMax aerosols offer more yield, faster work speed, and a broader spray pattern compared to conventional aerosols. The result is professional paint results akin to a spray gun, but without the disadvantages - no paint mixing, no cleaning of the spray gun, no thinner for cleaning, no compressor, and less overspray. This patented technology is exclusively from KWASNY.

To use the SprayMax 3680033 Epoxy Primer, first shake the can vigorously for 2 minutes before activating. To activate, simply take the red button from the cap and attach it to the pin on the bottom of the can. Place the top of the can on stable ground and push the button firmly. Shake again for two minutes to ensure the activator is thoroughly mixed with the primer. Once activated, the SprayMax Epoxy Primer will last approximately 4 days.

The SprayMax Epoxy primer boasts excellent adhesion and anticorrosion properties, making it suitable for use on a variety of surfaces, including Zinc-Coated Steel, Anodized Aluminum, Hot-rolled or Cold rolled Steel, and Fiberglass. Proper surface preparation is key - clean and sand the surfaces to be primed, and use a quality grease and wax remover before application. Apply 2-3 coats of the product, allowing 5-10 minutes between coats. After an approximate 12-hour drying time, lightly sand the surface before recoating with a topcoat or another primer.

SprayMax Aerosols function much like a conventional spray gun, with high transfer efficiency and great atomization. However, it is important to note that this product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

In summary, the SprayMax 3680033 2K Epoxy Rust-Cure Primer offers excellent adhesion and corrosion protection, even on critical surfaces such as aluminum. It features outstanding insulating and sealing properties, and can be recoated with a wide range of standard solvent- or water-borne basecoats or single-stage topcoats. This product is ideal for cleaned and sanded surfaces, providing a professional paint finish without the typical drawbacks of conventional spray equipment.

product information: